The first line of business: Never be caught off guard.

With more and more stories about collapsing roofs and severe building damage caused by major storms, you can't be too careful when it comes to protecting yourself and anyone occupying your building. Putting a plan in place today will help protect your property, your tenants and your reputation when the next storm hits.

• Determine the maximum snow-load capacity of your roof. Snow load is measured in pounds per square foot (psf). For example, 10 inches of snow is approximately 5 psf. Resources available to you include the building blueprints and specifications, local building codes, building inspectors and structural engineers.
• Inspect roof drains to ensure they are free of debris that may obstruct water flow. Check downspouts for blockage, and make sure that runoff discharges away from the building and walkways.
• Inspect the interior of the building for signs of a damaged or weakened roof structure. Complete repairs before the onset of cold weather.
• Fix any leaks, and repair or replace roof insulation as needed.
• Mark the location of skylights, roof drains, electrical lines or other utilities that could become obscured by snow.
• Make sure the necessary equipment is available and in good condition. These include snow shovels and snow blowers. Instruct appropriate employees in the proper use of all equipment prior to a storm.
• Implement a Fall Protection Program that meets current Provincial safety standards before allowing employees access to roofs. Be sure to review the program annually.
• Determine where removed snow will be deposited. These areas should be away from walkways, air intakes and emergency exits.
• Establish a plan for monitoring the path and intensity of storms, using Environment Canada, radio or television.
• Reduce the potential for ice damming by thoroughly sealing openings and providing proper ventilation.

Once the storm has ended, make sure to thoroughly inspect the building for any signs of distress. If you think there is any structural distress, consult with the local municipality office or a structural engineer before allowing tenants to re-occupy the building. Follow these additional steps to protect yourself and your tenants:

• Verify that roof drains and downspouts are clear to handle melting snow and runoff.
• Before removing any snow from the roof, cordon off the deposit area on the ground and post an employee to monitor the area to ensure that pedestrians or vehicles do not enter this zone.
• Avoid producing any uneven or concentrated loading during snow removal.
• If snow blowers are used on the roof, ensure that the blades are raised high enough to prevent damage to the roof cover.
• Watch for ponding as snow compresses and absorbs rain. The increased weight can create depressions that may not drain.
• If you’re a Chubb business client and your building has suffered damage due to a winter storm, click here to begin the claims process.